If you plan on removing asbestos in your home without professional help you should be aware that this strategy can lead to undesirable complications. It could also end up being nearly as costly as hiring a contractor. Nonetheless, it’s possible to perform your own asbestos tile removal, insulation removal, or different types of abatement with correct education. The main objective when carrying out the work by yourself should be to uphold the highest level of safety at all times.
Your first step is to obtain samples of the products that you assume may include asbestos and have them tested. After you have verified that asbestos is there you may then proceed with the work. Since asbestos materials aren’t toxic until its small particles are discharged into the air, it’s often advisable to leave them untouched as an alternative to getting rid of them.
The abatement procedure is a troublesome job and if something goes wrong you will not be able to obtain legal assistance as you would when hiring a professional asbestos abatement company. After considering the financial and health ramifications, if you still plan on going ahead with the procedure by yourself, the first step is to develop an overall strategy.
It is vital that you observe all legal guidelines and rules. Get a copy of your state and federal regulations and study them thoroughly. You will also be required to get any essential permits. Along with the documents you will receive directions on the right way to perform the removal safely and the right way to properly eliminate the hazardous items. Studying all directions is very essential. It can show you how to be proficient in removing the asbestos while keeping everybody safe.
The next step is to get a top quality breathing ventilation system for you. These are also known as breathing respirators. If there are other helpers in the abatement procedure every individual person will need their very own breathing respirator as well. Be aware that hiring different employees, apart from professional abatement contractors, is against the law. Protective clothes must also be bought and consists of eye protection, overalls, gloves, and boots. The protective garments will be used for this job only and later discarded.
There are other materials and gear that you’ll want including a pry bar, knife, garden sprayer and hose, and dish washing soap. All essential gear must be available before beginning the abatement procedure. In the event you do not know where to purchase this specialized gear you’ll be able to check your local yellow pages or telephone book for stores that sell protective clothes and gear in your region.
Carrying out the job without any help can make a troublesome job even tougher. It generally pays to have a helper. This enables one individual to scrape the asbestos-containing products while the other can keep it moist until disposal. The number one rule when removing hazardous asbestos is to keep it moist at all times. If the particles are permitted to dry up they will without difficulty become airborne. Throughout the whole abatement procedure your objective should be to make sure that no particles become airborne where they can be breathed in.
You should have containment bags that have been specifically created to carry asbestos debris. Contaminated materials should be scraped off surfaces straight into these special bags and then sealed. As soon as they’re given to the other worker they need to be resealed and then set into storage bins which are also sealed. The storage bins needs to be labeled and driven to a dump where asbestos will be disposed of lawfully. It is important that you notify the landfill site before the abatement procedure is performed. Without notification they might not have adequate room to accept your hazardous items.
Once all hazardous products have been completely removed areas should once more be wetted down. For further safety it is important to spray all areas with a sealant solution that can stop potentially hazardous particles from ever becoming airborne. This can encapsulate the particles, preventing them from creating health issues at a later time.
As soon as everything has been eliminated it is time to clean it all up. Ensure that all areas where work was done, whether completed or not, is totally wetted down to prevent any particles from getting into the air. Workers should also wet themselves and their protective garments down thoroughly. You will first have to hose off every worker and then take off the protective clothes. The respirator should stay in place until all garments have been removed. This can prevent inhaling loose particles while the clothes are being removed.
Never vacuum or sweep any loose fibers. The must be wetted and removed as previously explained. Once all work has been completed and all clothing has been removed every worker must shower or bathe completely.